Instant Alarm; Security Feedback; Mode 1:- Page 78

2-9

Instant Alarm

This feature allows you to activate an alarm by pressing
a button on the remote keyless entry transmitter. Your
ignition must be off for the instant alarm to work. When
you press the horn button on the remote keyless entry
transmitter, the headlamps will flash, the horn will honk
repeatedly, and the interior lamps will illuminate,
attracting attention if you need it. The alarm will
continue until:

D

You press the alarm button on the remote keyless
entry transmitter a second time,

D

the ignition is in RUN, or

D

an alarm period of about two minutes has elapsed.

Security Feedback

Security feedback provides audible and/or visible
feedback that a remote keyless entry lock or unlock
command has been received and executed. Your ignition
must be off for this feature to work.

You may select one of four operating modes for
reception of a lock command. You may also select one
of four operating modes for reception of an unlock
command. The selection and programming of the lock
and unlock operating modes are independent of each
other. The following modes are available for either lock
or unlock verification:

Mode 1: No Verification

Mode 2: Horn Chirp only

Mode 3: Headlamp Flash only

Mode 4: Horn Chirp and Headlamp Flash

The operating mode of the security feedback 
lock feature will be changed when you perform 
the following:

D

Turn the ignition key to RUN.

D

Close all the doors.

D

Press and hold the power door lock switch.

D

While holding the door lock switch, press 
and release the remote keyless entry transmitter 
lock button.