Dual Automatic ComforTemp Climate Control (If Equipped); Automatic Control; Temperature Control- Page 141

3-4

On cool, but sunny days, the sun may warm your upper
body, but your lower body may not be warm enough.
You can use BI

-

LEV and set the temperature levers to a

comfortable setting. The system will bring in outside air
and direct it to your upper body, while sending slightly
warmed air to your lower body. You may notice this
temperature difference more at some times than others.
Push the A/C button on for cooling.

Dual Automatic ComforTemp Climate
Control (If Equipped)

With this system, you set a temperature. You can 
then either let the system automatically control airflow
direction and force to maintain the temperature, or you
can manually adjust it. The system works best if you
keep your windows closed while using it.

Automatic Control

For the most efficient operation, you should set the
system temperature and press AUTO. The system will
select the best fan speed and airflow settings to keep you
comfortable. The air conditioning compressor will run if
the outside temperature is above 40

_

F (4

_

C). You may

notice a delay of two to three minutes before the fan
comes on at start up in cool weather.

Temperature Control

The TEMP switch sets the temperature for the entire
system when the light on the DUAL button isn’t lit. 
If the DUAL button light is lit, this master temperature
control sets the temperature for the driver only. Press the
up arrow to raise the temperature and press the down
arrow to lower the temperature. The display will show
your selection for a few seconds, then the outside
temperature will be displayed. If you push the AUTO
button, the system will control the fan speed and airflow.

The driver’s temperature and passenger’s temperature
settings will be automatically maintained even if manual
overrides have been selected except for settings at 60

_

F

(15

_

C) and 90

_

F (32

_

C).

Setting the temperature to 90

_

F (32

_

C) will lock control in

full hot, direct air to the floor, and increase the fan speed to
high. The system will not return to automatic temperature
control until the temperature setting is lowered.