Tail/Stop/Turn Signal Lamp- Page 278

6-36

Tail/Stop/Turn Signal Lamp

1. Remove the plastic wing nuts (A). (Pliers may be

required to remove the wing nuts.)

There is one wing nut located on the outside of 
the carpet. The other two are located underneath 
the carpet.

2. Pull the taillamp housing (B) away from the body

 of the vehicle.

3. Squeeze the tab on the socket and turn the 

socket counterclockwise.

4. Pull out the socket.

5. Pull the bulb out of the socket. (There are two bulbs

on each taillamp.)

6. Push in a new bulb.

7. Reverse these steps to reinstall the lamp assembly.