Page 489: WHAT TO DO IN EMERGENCIES
WHAT TO DO IN EMERGENCIES
CONTENTS
䡵
HAZARD WARNING FLASHERS . . . . . . . . . . .488
䡵
IF YOUR ENGINE OVERHEATS . . . . . . . . .
Page 490: HAZARD WARNING FLASHERS
HAZARD WARNING FLASHERS
The Hazard Warning flasher switch is located in the
switch bank near the top center of the instrument panel.
Press the switch to turn on the Hazard Warning
flasher. When the
Page 491: WHEEL AND TIRE TORQUE SPECIFICATIONS
•
You can also turn the temperature control to maximum
heat, the mode control to floor and the blower control
to high. This allows the heater core to act as a
supplement to the
Page 492: Torque Specifications
Torque Specifications
Lug Nut/Bolt Torque
**Lug Nut/
Bolt Size
Lug Nut/
Bolt Socket
Size
130 Ft-Lbs (176 N·m)
M14 x 1.50
22 mm
**Use only Chrysler recommended lug nuts/bolts and
clean or remove any dirt or oil before tightening.
Inspect the wheel
Page 493: TIREFIT KIT — IF EQUIPPED
Tighten the lug nuts/bolts in a star pattern until each
nut/bolt has been tightened twice.
After 25 miles (40 km) check the lug nut/bolt torque to be
sure that all the lug nuts/bolts