Fresh Manuals
Brands
Dodge
Automobiles
Charger

2014 Dodge Charger SRT Owner Manual

Installing A Child Restraint With A Switchable Automatic Locking Retractor (ALR)

Installing A Child Restraint With A Switchable

Automatic Locking Retractor (ALR)

Model Year
2014 Dodge Charger SRT Owner Manual

Table of Contents

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE
OCCUPANT RESTRAINTS
Child Restraints
UNDERSTANDING THE FEATURES OF YOUR VEHICLE
Uconnect® PHONE (4.3)
Uconnect® PHONE (8.4/8.4N)
ADAPTIVE CRUISE CONTROL (ACC) — IF EQUIPPED
UNDERSTANDING YOUR INSTRUMENT PANEL
STARTING AND OPERATING
MAINTAINING YOUR VEHICLE
MAINTENANCE PROCEDURES

Detailed Information for 2014 Dodge Charger SRT Owner Manual

Summary of Contents for 2014 Dodge Charger SRT Owner Manual

Page 95: Installing A Child Restraint With A Switchable Automatic Locking Retractor (ALR)
Installing A Child Restraint With A Switchable Automatic Locking Retractor (ALR) 1. Place the child seat in the center of the seating position. For some second row seats, you may need to recline the
Page 96: Installing Child Restraints Using The Top Tether Anchorage
8. If the child restraint has a top tether strap and the seating position has a top tether anchorage, connect the tether strap to the anchorage and tighten the tether strap. See the
Page 97: Adjustable Headrest Release Push Button
restraints, raise the head restraint, and where possible, route the tether strap under the head restraint and between the two posts. If not possible, lower the head restraint and pass the tether strap
Page 98: Tether Strap Mounting
1 — Cover A — Tether Strap Hook 3 — Attaching Strap B — Tether Anchor 4. Attach the tether strap hook of the child restraint to the top tether anchorage as shown in the
Page 99: Center Tether Attachment
Center Tether Attachment 1. Lower the adjustable center head restraint to the full down position. 2. Route the tether strap over the seatback and head restraint. 3. Attach the tether strap hook of the child

Lists of information found in 2014 Dodge Charger SRT Owner Manual

  • 1. Place the child seat in the center of the seating position.
  • 2. Pull enough of the seat belt webbing from the retractor to pass it through the seat belt path of the child restraint.
  • 3. Slide the latch plate into the buckle until you hear a “click”.
  • 4. Pull on the webbing to make the lap portion tight against the child seat.
  • 5. To lock the seat belt, pull down on the shoulder part of the seat belt until you have pulled all the seat belt webbing out of the retractor.
  • 6. Try to pull the webbing out of the retractor.
  • 5. 7.