Fresh Manuals
Brands
Dodge
Automobiles
Charger

2014 Dodge Charger SRT Owner Manual

(E) After Driving:

If tire pressure is less than 19 psi (1.3 Bar):

If the tire pressure is 19 psi (1.3 Bar) or higher:

Model Year
2014 Dodge Charger SRT Owner Manual

Table of Contents

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE
OCCUPANT RESTRAINTS
Child Restraints
UNDERSTANDING THE FEATURES OF YOUR VEHICLE
Uconnect® PHONE (4.3)
Uconnect® PHONE (8.4/8.4N)
ADAPTIVE CRUISE CONTROL (ACC) — IF EQUIPPED
UNDERSTANDING YOUR INSTRUMENT PANEL
STARTING AND OPERATING
MAINTAINING YOUR VEHICLE
MAINTENANCE PROCEDURES
Page 502

Detailed Information for 2014 Dodge Charger SRT Owner Manual

Summary of Contents for 2014 Dodge Charger SRT Owner Manual

Page 502: (E) After Driving:
(E) After Driving: Pull over to a safe location. Refer to “Whenever You Stop to Use TIREFIT” before continuing. 1. Push in the Mode Select Knob (5) and turn to the Air Mode position. 2.
Page 503: (F) Sealant Bottle And Hose Replacement:
5. Replace the Sealant Bottle (1) and Sealant Hose (6) assembly at your authorized dealer as soon as pos- sible. Refer to (F) “Sealant Bottle and Hose Replace- ment”. NOTE: When having the tire serviced,
Page 504: JUMP-STARTING PROCEDURES
JUMP-STARTING PROCEDURES If your vehicle has a discharged battery it can be jump- started using a set of jumper cables and a battery in another vehicle or by using a portable battery booster pack.
Page 505: Remote Battery Post Locations
WARNING! • Take care to avoid the radiator cooling fan when- ever the hood is raised. It can start anytime the ignition switch is ON. You can be injured by moving fan blades. • Remove any metal
Page 506: Jump-Starting Procedure
3. If using another vehicle to jump-start the battery, park the vehicle within the jumper cables reach, set the parking brake and make sure the ignition is OFF. WARNING! Do not allow vehicles to

Lists of information found in 2014 Dodge Charger SRT Owner Manual

  • 1. Push in the Mode Select Knob (5) and turn to the Air Mode position.
  • 2. Uncoil the power plug and insert the plug into the vehicle’s 12 Volt power outlet.
  • 3. Uncoil the Air Pump Hose (7) (black in color) and screw the fitting at the end of hose (7) onto the valve stem.
  • 4. Check the pressure in the tire by reading the Pressure Gauge (3).
  • 1.3 Bar): The tire is too badly damaged.
  • 1.3 Bar) or higher: 1.
  • 2. Disconnect the TIREFIT kit from the valve stem, reinstall the cap on the valve stem and unplug from 12 Volt outlet.
  • 3. Place the TIREFIT kit in its proper storage area in the vehicle.
  • 4. Have the tire inspected and repaired or replaced at the earliest opportunity at an authorized dealer or tire service center.