Fresh Manuals
Brands
Dodge
Automobiles
Charger

2014 Dodge Charger SRT Owner Manual

Installing Child Restraints Using The Top Tether Anchorage

Installing Child Restraints Using The Top Tether

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

Model Year
2014 Dodge Charger SRT Owner Manual

Table of Contents

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE
OCCUPANT RESTRAINTS
Child Restraints
UNDERSTANDING THE FEATURES OF YOUR VEHICLE
Uconnect® PHONE (4.3)
Uconnect® PHONE (8.4/8.4N)
ADAPTIVE CRUISE CONTROL (ACC) — IF EQUIPPED
UNDERSTANDING YOUR INSTRUMENT PANEL
STARTING AND OPERATING
MAINTAINING YOUR VEHICLE
MAINTENANCE PROCEDURES

Detailed Information for 2014 Dodge Charger SRT Owner Manual

Summary of Contents for 2014 Dodge Charger SRT Owner Manual

Page 96: Installing Child Restraints Using The Top Tether Anchorage
8. If the child restraint has a top tether strap and the seating position has a top tether anchorage, connect the tether strap to the anchorage and tighten the tether strap. See the
Page 97: Adjustable Headrest Release Push Button
restraints, raise the head restraint, and where possible, route the tether strap under the head restraint and between the two posts. If not possible, lower the head restraint and pass the tether strap
Page 98: Tether Strap Mounting
1 — Cover A — Tether Strap Hook 3 — Attaching Strap B — Tether Anchor 4. Attach the tether strap hook of the child restraint to the top tether anchorage as shown in the
Page 99: Center Tether Attachment
Center Tether Attachment 1. Lower the adjustable center head restraint to the full down position. 2. Route the tether strap over the seatback and head restraint. 3. Attach the tether strap hook of the child
Page 100: SAFETY TIPS
and lubricant changes should be consistent with antici- pated climate and conditions under which vehicle opera- tions will occur. For the recommended viscosity and quality grades, refer to “Maintenance Procedures” in “Maintaining Your Vehicle”. CAUTION! Never

Lists of information found in 2014 Dodge Charger SRT Owner Manual

  • 8. If the child restraint has a top tether strap and the seating position has a top tether anchorage, connect the tether strap to the anchorage and tighten the tether strap.
  • 9. Test that the child restraint is installed tightly by pulling back and forth on the child seat at the seat belt path.
  • 25.4 mm) in any direction.
  • 1. Look behind the seating position where you plan to install the child restraint to find the tether anchorage.
  • 2. Rotate or lift the cover to access the anchor directly behind the seat where you are placing the child restraint.
  • 3. Route the tether strap to provide the most direct path for the strap between the anchor and the child seat.