Press - Page 352

ERROR MESSAGES

338

This message is displayed 

when 

 is pressed 

when changing thread colors.

This message appears if the 
machine is turned off while 
sewing, then turned on again. 

Press 

 to return the 

machine to the condition 
(pattern position and number 
of stitches) when it was 
turned off. Follow the 
procedure described in “If the 
Thread Breaks During 
Sewing” on page 224 to align 
the needle position and sew 
the remainder of the pattern.

This message is displayed 
when the “Start/Stop” button 
is pushed and the machine is 
in embroidery mode, but the 
embroidery unit is not 
attached.

This message is displayed 
when replacing the 
embroidering bobbin thread.

This message is displayed 
when rotating a saved 
combined pattern in the 
Embroidery screen.

This message is displayed 
when the embroidery frame is 
attached.

This message is displayed 
when the machine failed to 
recognize the embroidery 
positioning mark.
- Confirm that the embroidery 

positioning mark is in the 
selected area. If problem 
persists, see pages 209 and 
304 to reposition mark.

- Machine failed to recognize 

printed positioning mark. 
Set “Page Scaling” to “None 
(100%)” and try printing the 
embroidery positioning 
mark again. (see pages 221 
and 310)

This message is displayed 
when the machine has 
recognized the embroidery 
position mark. Remove the 
embroidery positioning 

sticker and press 

 to 

continue. To remove the 
embroidery positioning 
sticker more easily, press 

. (see pages 209 and 

304)