3-14. Writing sewing data to floppy disks; End data read/write mode; 3-14. Writing sewing data to floppy disks - Page 39

3. READING / WRITING DATA 

32

BAS-311G, BAS-326G 

4 

Loading

Press the R/W key. 
 

•

  The buzzer will sound and the selected sewing data will be loaded 

from the floppy disk and copied into the sewing machine's internal 
memory. 

•

  The program numbers that have been read will appear in the menu 

display. 

 
*  If there is a large volume of data in the floppy disk, it will take some 

time for all of it to be read. 
To halt the reading of data, press the STOP switch. If you then 
press the RESET key, the display will change back to [ ALL]. 

NOTE: 

If there is no data in the selected program number, error [E421] will 
be displayed. Press the RESET key and then select another 
program number. 

5 

End data read/write mode

TEST indicator switches off

Press the TEST key. 
Turn off the power and remove the floppy disk. 
 
 

3-14. Writing sewing data to floppy disks 

1 

Insert the floppy disk into the floppy disk drive.

2 

Select the [w 10] data read/write mode. 
 

3 

Press the R/W key. 
 
 
 
 

•

  [Fdd-] will change to [ ALL]. 

 
Press the   or    key to select the program number to 
be written. 
*  If [ ALL] is selected, all sewing data will be written at 

once. 

5064Q

4577Q

5063Q