8. ELECTRICAL MECHANISM; 8-1. Precautions while carrying out adjustments; Injury - Page 117

8. ELECTRICAL MECHANISM 

110

BAS-311G, BAS-326G

8. ELECTRICAL MECHANISM 

 DANGER 

Wait at least 5 minutes after turning off the power switch and disconnecting the power cord from the wall outlet 
before opening the cover of the control box. Touching areas where high voltages are present can result in severe 
injury.

8-1. Precautions while carrying out adjustments 

Electric shocks 

High voltages can remain in large-capacity capacitors for up to 5 minutes in some circumstances, even when the power has 
been turned off. Accordingly, wait at least 5 minutes after turning off the power before carrying out the following operations. 

•

  Opening and closing the control box 

•

 Replacing 

fuses 

•

  Inserting and disconnecting connectors 

•

  Measuring resistance values 

•

  Any other tasks that may involve touching components inside the control box 

Some inspection items require the control box to be open when the power is turned on and voltages are measured. 
At such times, be extremely careful never to touch anywhere other than the specified locations. In addition, note that high 
voltages may remain for up to 5 minutes after the power is turned off. 

Injury 

The fan inside the control box turns while the power is turned on, so be careful not to get anything caught in it. 
Be careful not to touch metallic objects such as the heat sink and cover when connecting and disconnecting connectors and 
making measurements. 
 

Be sure to note the following cautions when opening the control box to carry out inspections and adjustments.