2-8. Input checking method; 2-8. Input checking method ; 2. FUNCTION SETTINGS - Page 24

2. FUNCTION SETTINGS 

17

BAS-311G, BAS-326G

2-8. Input checking method 

Use this to check for any malfunctions of the operation panel keys, circuit boards or sensors, and for checking for broken 
cords and for adjusting sensor positions. 
You can check whether the CPU is correctly reading the signals from keys and sensors. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
1.  While pressing the    key (1), turn on the power switch. 

* Keep pressing the    key (1) until the model name is displayed and the buzzer beeps once. 
The check code will be displayed in the PROGRAM No. display (2), and the input status will be displayed in the menu 
display (3). 

2. Press 

the   key (1) or    key (4) to select the desired check code. 

If no operations are carried out for 5 seconds after a check code has been selected, the check code and the 
abbreviated input name will flash alternately in the PROGRAM No. display (2). 

3.  Refer to the input check list for key and sensor responses. 
4.  To return to normal operation, turn off the power switch and then turn it back on again. 
 

<Input check list> 

PROGRAM No. display 

Menu display 

Check code 

Name 

Input status 

Check item and checking method 

[  1] 

[orX] 

[  H] / [  L] 

X-axis motor home position sensor signal 
Move the feed mechanism by hand in the X direction. 

[  2] 

[EnX] 

[-999] 

−

 [999] 

X-axis motor encoder counter value 
Move the feed mechanism by hand in the X direction. 

[  3] 

[orY] 

[  H] / [  L] 

Y-axis motor home position sensor signal 
Move the feed mechanism by hand in the Y direction. 

[  4] 

[EnY] 

[-999] 

−

 [999] 

Y-axis motor encoder counter value 
Move the feed mechanism by hand in the Y direction. 

[  5] 

[orP] 

[  H] / [  L] 

Work clamp motor home position sensor signal 
Raise the work clamp by hand. 

[  6] 

[EnP] 

[-999] 

−

 [999] 

Work clamp motor encoder counter value 
Raise the work clamp by hand. 

[  7] 

[Enn] 

[  0] 

−

 [180] 

Upper shaft 180 degree rotation signal 
Turn the pulley by hand. 

4566Q

4565Q