7-22. Adjusting the needle up stop position; 7-22. Adjusting the needle up stop position ; 7. ADJUSTMENT - Page 115

7. ADJUSTMENT 

BAS-311G, BAS-326G 

108

7-22. Adjusting the needle up stop position 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Use the operation panel to adjust the needle up stop position so that the needle bar (1) is lowered 6.2 – 6.7 mm from its 
highest position (near the highest stop position for the thread take-up). 

NOTE: 

When the four bolts (2) of the sewing machine motor and the bolt (3) of the magnet are loosened, the feed timing may 
move out of adjustment. Do not loosen these bolts when the settings are at the factory defaults or after adjusting the 
needle up stop home position.

[Adjustment method] 

1 

TEST indicator and SPEED indicator light

While pressing the 

 keys simultaneously, turn on 

the power switch. 
*  Keep pressing the 

 keys until the model name is 

displayed and the buzzer beeps once. 

 
 
 
 
 
 
 
 
 
•  "orG" will flash in the PROGRAM No. display and the 

offset value will be displayed in the menu display. 

2 

Depress the foot switch to the 2nd step. 
(If using a two-pedal foot switch, lower the work clamp before 
depressing the start switch.) 
• X-Y home position detection will be carried out and the "orG" will 

stop flashing and illuminate steadily. 

2nd step 

4441Q

4703Q 4448Q 4421Q

5216Q

5211Q