2-9. Output checking method; 2-9. Output checking method ; 2. FUNCTION SETTINGS - Page 27

2. FUNCTION SETTINGS 

20

BAS-311G, BAS-326G

2-9. Output checking method 

Use this to check for any malfunctions of the circuit boards, and for checking for problems with drive mechanisms and 
broken cords. 
You can check whether the signals being output by the CPU are driving the mechanisms correctly. 

1.  While pressing the    key (1), turn on the power switch. 

*  Keep pressing the    key (1) until the model name is 

displayed and the buzzer beeps once. 

The check code will be displayed in the PROGRAM No. 
display (2), and the abbreviated name of the output will 
be displayed in the menu display (3). 

2. Press the   key (4) or    key (1) to select the desired 

check code. 

3. The operations for check codes 51 to 54 can be 

checked by pressing the   or   key (5). 

4. For check codes 55 and onward, depress the foot 

switch to the 2nd step. 
(If using a two-pedal foot switch, lower the work clamp 
before depressing the start switch (6). ) 

5.  To return to normal operation, turn off the power switch 

and then turn it back on again. 

PROGRAM No. display 

Menu display 

Check code 

Name 

Operating details 

[ 51] 

[PM-X] 

When the    key is pressed, the work clamp moves to the left. 
When the    key is pressed, the work clamp moves to the right. 

[ 52] 

[PM-y] 

When the    key is pressed, the work clamp moves forward. 
When the    key is pressed, the work clamp moves back. 

[ 53] 

[PM-F] 

When the    key is pressed, the work clamp lifts. 
When the    key is pressed, the work clamp drops. 

[ 54] 

[CAtH] 

When the    key is pressed, the thread nipper moves to the home position. 
When the    key is pressed, the thread nipper moves to the retract position. 
[Option compatibility] 

[ 55] 

[CL-r] 

Right clamp valve turns on. (OUT16) (*1) 

[ 56] 

[CL-L] 

Left clamp valve turns on. (OUT15) (*1) 

[ 57] 

[Foot] 

Intermittent presser foot valve turns on. (OUT14) (*1) 

[ 58] 

[FLiP] 

Inner clamping device valve turns on. (OUT13) (*1) 

[ 59] 

[CooL] 

Needle cooler valve turns on. (OUT12) (*1) 

[ 60] 

The panel LEDs illuminate in order, and then the seven segments of the 
PROGRAM No. display and the menu display illuminate one by one. 

*1  Applies for pneumatic specifications when corresponding devices are installed. 

The corresponding operation for the check code will
be carried out while the foot switch is being
depressed (while the foot switch has been depressed
once for check code 60). 

2nd step

4441Q 4953Q 

4567Q