7-20-2. X-Y feed home position; Repeat steps 4 and 5 to adjust the home position.; End adjustment mode. - Page 112

7. ADJUSTMENT 

BAS-311G, BAS-326G 

105

5 

Press the RESET key. 
•  The work clamp will move to the home position. Check 

the home position. 

7 

Repeat steps 4 and 5 to adjust the home position.

8 

End adjustment mode. 
 
 
 
 

TEST indicator switches off

Press the TEST key. 
•  The display will return to the normal display and the 

sewing machine will switch to home position detection 
standby. 

NOTE: 

Always be sure to press the RESET key and check the home position before ending adjustment mode. If you end 

adjustment mode without checking the home position, error "E303" may be generated. 

7-20-2. X-Y feed home position 

1 

Turn the pulley to set the needle to the needle up stop position. 

2 

TEST indicator and X-SCALE indicator light

While pressing the 

 keys simultaneously, turn on 

the power switch. 
* Keep pressing the 

  keys until the model name is 

displayed and the buzzer beeps once. 

 
 
 
 
 
 
 
 
 
 
•  "orG" will flash in the PROGRAM No. display and the 

offset value (default: 0) will be displayed in the menu 
display. 

3 

Press the SELECT key so that either the X-SCALE 
indicator or the Y-SCALE indicator illuminates. 
 
 
 
 
 

4 

Press the RESET key. 
• Home position detection will be carried out, and the feed mechanism will stop at the 

currently-registered home position. 

*  If you press the RESET key for 2 seconds or more at this time, the offset value will be reset 

to “    0 ”. 

4570Q

5205Q 4443Q 4421Q