11. Using the DIP switches- Page 44

37

BAS-761

No.

1

2

3

4

5

6

7

8

Functions when ON

7 stitches counted before upper thread breakage is detected

OFF: 3 stitches counted before upper thread breakage is detected

After sewing, the work clamp and machine head return to the previous standby position, even if folding
has been completed.

Movement to the feed destination occurs immediately when the program data requires it.

After sewing, the timer starts 0.2 seconds after the work clamp is raised.

Not available (Should be set to OFF)

Not available (Should be set to OFF)

Not available (Should be set to OFF)

Not available (Should be set to OFF)

11. Using the DIP switches

¡

DIP switch C

¡

DIP switch D

No.

1

2

3

4

5

6

7

8

Functions when ON

The gauge standby position is always forward.

When OFF: The gauge standby position is at the back.

Continuous label attachment mode

When OFF: Alternate label attachment mode

Folder operates at low speed

Folder procedure changes

Folding is released when base 1.5 is raised

Not available (Should be set to OFF)

Not available (Should be set to OFF)

Not available (Should be set to OFF)

¡

DIP switch E

No.

1

2

3

4

5

6

7

8

Functions when ON

Not available (Should be set to OFF)

Not available (Should be set to OFF)

Not available (Should be set to OFF)

Not available (Should be set to OFF)

Not available (Should be set to OFF)

Not available (Should be set to OFF)

Not available (Should be set to OFF)

Not available (Should be set to OFF)