Queue Server ; Change Bindery Queues; New Queue- Page 69

6 - 7 NOVELL NETWARE PRINTING

3

One or more print servers will appear in the list (the default node 
names are 

BRN_xxxxxx

, where 

xxxxxx

 is the last six digits of 

the Ethernet address (MAC address)). 

4

Select the print server that you wish to configure and double 
click it. You will be asked for a password. The default password 
is  

access

.

5

Select the NetWare tab. 

a

If it is not already selected, select Queue Server as the 
operating mode. 

b

Click the Change Bindery Queues button.

c

Select the NetWare server which you wish to configure.

d

Select the New Queue button and type in the queue name 
which you wish to create.

e

Once you have done that highlight the queue name you 
created and click on the Add button.

f

Click on Close and then OK.

Now exit the BRAdmin application. You are ready to print.

You can find the node name and MAC address by printing 
out the printer settings page. Refer to the Quick Setup Guide 
for information on how to print the settings page on your print 
server.

If necessary change the NetWare Print Server Name. The 
default NetWare print server name will usually be 

BRN_xxxxxx_P1

 where 

xxxxxx

 is the Ethernet address of 

the print server. Be careful! Changing the name may impact 
the configuration of other protocols because the print server 
service names will be altered.