Remote Printer; Start/Program/Brother BRAdmin - Page 75

6 - 13 NOVELL NETWARE PRINTING

12

Change context if necessary and select the print queue you 
created. Click OK and then OK again, and then exit NWADMIN.

13

Start the appropriate BRAdmin application, and select the 
correct print server you wish to configure (by default, the node 
names will begin with 

BRN_xxxxxx

, where 

xxxxxx

 is the last 

six digits of the Ethernet address (MAC address)). 

14

Double click the appropriate print server. You will be prompted 
for a password, the default password is 

access

.

15

Now select the NetWare tab.

16

Select Remote Printer as the Operating Mode, select the 
name of your PSERVER NLM as the print server Name and 
select the number of the printer from step 6 as the Printer 
Number.

17

Click OK. And exit BRAdmin.

You must now unload the PSERVER NLM from your NetWare file 
server console and then reload it in order for the changes to take 
effect.
As an alternative to Brother's BRAdmin application or the Novell 
NWADMIN application, you can use the standard Novell 
PCONSOLE utility in conjunction with Brother's BRCONFIG program 
to set up your print queues. BRCONFIG program will be installed at 
the same time when you install the BRAdmin and you can find the 
BRCONFIG in the menu Start/Program/Brother BRAdmin 
utilities. 

You can find the NetWare server name and MAC address by 
printing out the printer settings page. Refer to the Quick 
Setup Guide for information on how to print the settings page 
on your print server.

The same service assigned by NetWare print server cannot 
be used for both queue server mode and remote printer 
mode. If you want to enable remote printer capabilities on a 
service other than the default NetWare service, you must 
define new services that are enabled for NetWare and for the 
desired port.