Part Name; Part Code; Main power switch- Page 9

6

Contents

Setting Up

Basic Sewing

Machine

Operation

Utility Stitches

Embroidering

Maintenance

Troubleshooting

Error

Messages

Sewing Chart

Patterns

(Programmed

in Machine)

Patterns

(Memory Card)

A. MAIN POWER SWITCH AND

CONNECTORS

1

Power socket
Use to connect machine to power supply.

2

Main power switch
Use to turn on/off the main power.

3

Air vents

4

Card slot
Slot for memory card insertion.

5

Foot controller jack
Use to connect the foot controller.

CAUTION
–

When leaving the sewing machine unat-
tended, the main switch of the machine must
be switched off or the plug must be removed
from the socket-outlet.

–

When servicing the sewing machine, or
when removing covers or changing bulbs,
the machine or the electrical set must be
unplugged.

–

For U.S.A. only
This appliance has a polarized plug (one
blade wider than the other). To reduce the
risk of electric shock, this plug is intended
to fit in a polarized outlet only one way.
If the plug does not fit fully in the outlet, re-
verse the plug. If it still does not fit, contact
a qualified electrician to install the proper
outlet. Do not modify the plug in any way.

B. FLATBED ATTACHMENT WITH

ACCESSORY COMPARTMENT

I

Slide accessory case to the left and out of the
machine.

II

Each presser foot has a letter.

1

Presser foot letter

III

ACCESSORY LIST
The location of each accessory is shown in fig-
ure 

III

.

J

1

6

7

1

3

2

4

5

I

II

III

1

Buttonhole foot “A”

X57789-101

2

Overcasting foot “G”

X51162-001

3

Seam ripper

X54243-001

4

Bobbin

X80309-001

5

Needle set

XA6627-001

6

Spool cap (Large)

130012-003

7

Spool cap (Small)

XA5752-001

No.

Part Name

Part Code

*

Always use BROTHER accessories with this
machine.

1

2

3

4

5