Repeat steps 5 and 6 to adjust the home position.; End adjustment mode. ; 7. ADJUSTMENT - Page 113

7. ADJUSTMENT 

BAS-311G, BAS-326G 

106

5 

Use 2 mm diameter pins (shaped like a needle) to align the holes in the X feed bracket (1) and the needle plate (2) 
with the two holes in the home position reference plate (3), press the   or    key to change the offset value (-999 – 
999) in order to lower the needle to the home position. 
• The feed mechanism will move in conjunction with the setting value. 
Once the home position is aligned, tighten the two bolts (4) and remove the pins (shaped like a needle).

6 

Press the RESET key. 
•  The feed mechanism will move to the home position. 

Check the home position. Once the home position is 
correctly aligned, remove the home position reference 
plate (3). 

7 

Repeat steps 5 and 6 to adjust the home position.

8 

End adjustment mode. 
 
 
 
 

TEST indicator switches off

Press the TEST key. 
•  The display will return to the normal display and the 

sewing machine will switch to home position detection 
standby. 

NOTE: 

Always be sure to press the RESET key and check the home position before ending adjustment mode. If you end 

adjustment mode without checking the home position, error "E202" may be generated. 

5208Q 5276Q