End adjustment mode.; 7. ADJUSTMENT ; NOTE: - Page 116

7. ADJUSTMENT 

BAS-311G, BAS-326G 

109

3 

Press the   or    key to set the offset value (-9 - 10). 
• When you press the    key, the needle bar will drop, and when you 

press the    key, it will rise. 

NOTE: 

After changing the offset value, check that the thread trimming 
operation is normal and that error [E110] is not generated.

4 

Depress the foot switch to the 2nd step. 
(If using a two-pedal foot switch, lower the work clamp before 
depressing the start switch.) 
• The upper shaft will move and stop at the offset value that has been 

set. 

5 

End adjustment mode.

TEST indicator switches off

Press the TEST key. 
• The offset value will be memorized and the sewing machine will 

switch to home position detection standby.   

2nd step 

4441Q

5212Q