2. FUNCTION SETTINGS - Page 14

2. FUNCTION SETTINGS 

7

BAS-311G, BAS-326G

No. 

Setting 

range 

Setting items 

Initial value

Work clamp operation before home position detection 

OFF 

Work clamp cannot be raised or lowered before home position is detected 

051 

ON 

Work clamp can be raised and lowered before home position is detected 

ON 

Work clamp operation during split programs 

OFF 

Work clamp lifts automatically when sewing pauses due to a split program 

052 

ON 

Work clamp lifts when the foot switch is depressed when sewing pauses due to a 
split program 

OFF 

Time from intermittent presser foot lifting until feed mechanism starts moving 

053 

0 

−

 999 

Units (mS) 

100 

Intermittent presser foot drop timing 

0 

Presser foot drops when the work clamp switch is depressed, but it does not drop 
at the feed retract position. 

1 

Presser foot drops when the work clamp switch is depressed. 

054 

2 

Presser foot drops at the sewing start, regardless of the work clamp switch 
operation. 

0 

Work clamp signal valve special output for pneumatic-type work clamp (pneumatic specifications) 

0 Disabled 

1 

Valve output is reversed for pneumatic specifications 
(Connect the air tubes in reverse so that the work clamp can lift when the power is 
turned off.) 

055 

2 

Reverse valve output is output simultaneously for 2-position valve specifications. 
(Right work clamp reverse = Option output No. 4, Left work clamp reverse = 
Option output No. 5) 

0 

Thread winding operation before home position is detected 

OFF 

Thread winding cannot be carried out before home position is detected. 

056 

ON 

Thread winding can be carried out before home position is detected. 

OFF 

Work clamp operation when feed moves to sewing start position after home position is detected 

OFF 

Work clamp stays dropped after home position is detected 
Work clamp lifts when pedal is depressed backward (for single pedal) or when 
work clamp switch is depressed (for 2 pedals) 

057 

ON 

Work clamp lifts automatically after home position is detected. 
*  Disabled when memory switch No. 050 = 2 or 4. 

ON 

Work clamp operation at sewing end 

OFF 

Work clamp lifts automatically at the sewing end 
*  Disabled when memory switch No. 050 = 2 or 4. 

058 

ON 

Work clamp does not lift automatically at the sewing end 

OFF