Operation panel settings; User program settings ; 2. FUNCTION SETTINGS - Page 17

2. FUNCTION SETTINGS 

10

BAS-311G, BAS-326G

Operation panel settings

No. 

Setting 

range 

Setting items 

Initial value

Operation panel changing limitation 

0 

No limits on changing setting values using the operation panel. 

1 

Program numbers, XY scale, sewing speed, lower thread counter, work clamp 
height, intermittent height and digital tension values cannot be changed. 

2 

Program numbers, XY scale, sewing speed, work clamp height, intermittent height 
and digital tension values cannot be changed. 

3 

Program numbers cannot be changed. 

4 

Program numbers and XY scale settings cannot be changed. 

5 

Program numbers, XY scale and sewing speed settings cannot be changed. 

6 

XY scale settings cannot be enlarged. (They can be reduced.) 

350 

7 

Sewing speed setting cannot be changed. 

0 

Changing memory switches 

OFF Allowed 

351 

ON Forbidden 

OFF 

Counting method for lower thread counter and production counter 

0 

Counted for each item of sewing data 

1 

Counted for each thread trimming operation. 

352 

2 

Counted when sewing data ends or when split stops 

0 

Counter timing for lower thread counter 

OFF 

Counted at the end of sewing. 

353 

ON 

Counted at the start of sewing. 

OFF 

Switching program numbers using an external switch 

0 Disabled 

354 

1 

−

 9 

Program number is switched by means of the 5 bits of option input (EXIN6 

−

EXIN10). 
Applicable numbers are: Setting number = 3rd digit, last two digits can be 1 

−

 31. 

0 

Switches split numbers using an external switch 

OFF Disabled 

355 

ON 

Split number is switched by means of the 5 bits of option input (EXIN6 

−

 EXIN10). 

Applicable numbers are 1 

−

 31 (only enabled for independent split mode) 

OFF 

User program settings 

No. 

Setting 

range 

Setting items 

Initial value

Moving to start point when switching user programs 

OFF 

Feed moves to the start point after starting and switching. 

450 

ON 

Feed moves to the next sewing start point at the same time as the user program 
switches. 

OFF 

Limitations on changing settings for user programs 

OFF No 

limit 

452 

ON 

User program contents cannot be changed. 

OFF