6. ASSEMBLY- Page 66

6. ASSEMBLY

BAS-311G, BAS-326G

59

16. Driving lever 

17. Thread trimmer collar 

18. Collar shaft 

19. Retaining ring, E 

20. Set screw 

21. Thread trimmer rod V 

22. Shoulder screw B 

23. Nut 

24. Guide shaft 

25. Spring 

26. Cushion 

27. Set screw 

28. Thread trimmer solenoid 

29. Solenoid setting plate 

30. Plain washers [2 pcs] 

31. Spring washers [2 pcs] 

32. Bolts [2 pcs] 

33. Solenoid cushion

34. Washer 

35. Solenoid lever 

36. Set screw 

37. Bolts with washer [2 pcs] 

38. Pushing lever 

39. Shoulder screw 

40. Set screw 

41. Nut 

42. Connecting plate 

43. Shoulder screw 

44. Shoulder screw B 

45. Nut 

46. Plain washer 

47. Spring washer 

48. Bolt 

When the ball joint assembly of

thread trimmer rod V has been

disassembled, assemble it so that

the distance between the centers of

the holes is 287.5 

±

 0.5 mm. 

4615Q

4853Q 

5136Q

Tighten the set screw on the screw

flat while lightly pressing the collar

shaft. 

Check that the thread trimmer collar

turns smoothly. 

Assemble so that the wick is

hanging down. 

Apply grease.