6. ASSEMBLY- Page 70

6. ASSEMBLY

BAS-311G, BAS-326G

63

 
 
 
 
 
 
 
 
 
 
 
 
 
1)  With the screw stop of the work clamp pulse motor facing

downward and the index mark on the work clamp driving gear

facing to the right, adjust so that the clearance between the

work clamp pulse motor and the work clamp driving gear is 6.2

mm, and then tighten the two set screws. 

5165Q

 
 
 
 
 
 
 
 
 
 
 
 
 
Hook the spring into the arm hole as shown

in the illustration. 

29.  Work clamp pulse motor

30.  Work clamp driving gear

31.  Set screws [2 pcs] 

32.  Work clamp motor plate

33.  Bolts [4 pcs] 

34.  Bolts [2 pcs] 

35.  Work clamp spring 

2)  Install the work clamp pulse motor to the work clamp

motor plate with the four bolts so that the motor

connector is facing downward. 

3)  Align the index marks on the work clamp cam gear

and the work clamp driving gear, and then install the

work clamp motor plate with the two bolts so that

there is no backlash. 

5164Q

5167Q

5166Q

Index mark

Index mark