6. ASSEMBLY- Page 74

6. ASSEMBLY

BAS-311G, BAS-326G

67

26. Feed bracket X

27. Bolts M3X6 [8 pcs] 

28. Bolts M4X8 [2 pcs] 

29. Flat screws [8 pcs] 

30. X-belt holder 

31. X-belt holder plate 

32. Bolts [2 pcs] 

5176Q

5177Q

Push the X-LM guide against the

positioning pins of the feed

bracket and then tighten the

bolts. 

Engage. 

18. Y-LM spacers [2 pcs]

19. Flat screws [16 pcs] 

20. Y-LM guides [2 pcs] 

21. Plain washers [8 pcs] 

22. Spring washers [8 pcs] 

23. Bolts [8 pcs] 

24. X-LM guide [2 pcs] 

25. Bolts [8 pcs] 

Install the X-belt holder in between the X-LM guides as
shown in the diagram.

5215Q

Provisionally tighten the bolts so

that their heads do not protrude

from the top of the X-LM guide on

the inside.