6. ASSEMBLY- Page 72

6. ASSEMBLY

BAS-311G, BAS-326G

65

 
 
 
 
 
 
 
 
 
 
 
 
 
1)  With the screw stop of the work clamp pulse motor facing

downward and the index mark on the work clamp driving gear

facing to the right, adjust so that the clearance between the

work clamp pulse motor and the work clamp driving gear is 6.2

mm, and then tighten the two set screws. 

15. Work clamp pulse motor

16.  Work clamp driving gear 

17.  Set screws [2 pcs] 

18.  Work clamp motor plate 

19.  Bolts [4 pcs] 

20.  Bolts [2 pcs] 

2)  Install the work clamp pulse motor to the work clamp

motor plate with the four bolts so that the motor

connector is facing downward. 

3)  Align the index marks on the work clamp cam gear

and the work clamp driving gear, and then install the

work clamp motor plate with the two bolts so that

there is no backlash. 

5170Q

5171Q

5172Q

Index mark

Index mark