倀刀䔀匀匀䔀刀 䘀䔀䔀吀 ⼀ 䘀䔀䔀䐀 䐀伀䜀匀; 䌀栀愀渀最椀渀最 琀栀攀 瀀爀攀猀猀攀爀 昀漀漀琀; Changing the presser foot- Page 17

Brother PC-6500 User's Guide

2014 Dodge Charger SRT Owner Manual

Table of Contents

匀䔀吀吀䤀一䜀 唀倀
匀䔀圀䤀一䜀
唀吀䤀䰀䤀吀夀 匀吀䤀吀䌀䠀䔀匀
䴀夀 䌀唀匀吀伀䴀 匀吀䤀吀䌀䠀吀䴀 ⠀䌀刀䔀䄀吀䔀 夀伀唀刀 伀圀一 匀吀䤀吀䌀䠀 䐀䔀匀䤀䜀一匀⤀
䔀䴀䈀刀伀䤀䐀䔀刀䤀一䜀 
background image

14

CONTENTS

SETTING UP

SEWING

UTILITY

STITCHES

MY CUSTOM

STITCH

TM

(CREATE

YOUR

OWN

STITCH

DESIGNS)

EMBROIDERING

MAINTENANCE

ERROR

MESSAGES

SEWING CHART

PATTERNS

(PROGRAMMED

IN MACHINE)

PRESSER FEET / FEED DOGS

1

2

1. Press the needle position button to raise the needle, and

then turn off the sewing machine.

2. Raise the presser foot lever.

1

3. Press the black button located at the back of the presser

foot holder to release the foot.

1

Presser foot holder

1

2

4. Place the other presser foot below the holder so that the

presser foot pin is aligned with the slit in the holder.

5. Lower the presser foot lever so that the presser foot pin

snaps into the notch in the presser foot holder.

1

Notch in presser foot holder

2

Presser foot pin

It may be necessary to change the presser foot depending on the stitch that is selected.

Changing the presser foot

Detailed Information for Brother PC-6500 User's Guide

Lists of information found in Brother PC-6500 User's Guide - Page 17

  • 1. Press the needle position button to raise the needle, and then turn off the sewing machine.
  • 2. Raise the presser foot lever.
  • 3. Press the black button located at the back of the presser foot holder to release the foot.
  • 4. Place the other presser foot below the holder so that the presser foot pin is aligned with the slit in the holder.
  • 5. Lower the presser foot lever so that the presser foot pin snaps into the notch in the presser foot holder.

Related Documents for Brother PC-6500 User's Guide