䔀夀䔀䰀䔀吀 匀吀䤀吀䌀䠀䤀一䜀; STITCH ADJUST ; EYELET STITCHING- Page 68
Brother PC-6500 User's Guide
Table of Contents
1. Press the STITCH ADJUST key, and then select the eyelet
size.
2. Attach presser foot N.
3. Check that the needle drops at the desired position, lower
the presser foot lever, and then start sewing. Once sewing
is completed, the machine automatically sews reinforcement
stitches, and then stops.
1
Needle drop point
Note
If automatic thread cutting is turned on before you start sewing,
both threads are automatically cut after the reinforcement
stitches are sewn.
4. Make a hole in the center with an eyelet punch.
EYELET STITCHING
N
L
M
S
L (large): 9/32" (7.0 mm)
M (medium): 15/64" (6.0 mm)
S (small): 13/64" (5.0 mm)
1
Eyelet
1
Use this stitch for making eyelets, such as on belts.
(
Shown in actual size.)
65
Detailed Information for Brother PC-6500 User's Guide
Lists of information found in Brother PC-6500 User's Guide - Page 68
- 1. Press the STITCH ADJUST key, and then select the eyelet size.
- 2. Attach presser foot N.
- 3. Check that the needle drops at the desired position, lower the presser foot lever, and then start sewing.
- 4. Make a hole in the center with an eyelet punch.
- 7.0 mm) M (medium): 15/64" (6.
- 5.0 mm) 1 Eyelet 1 Use this stitch for making eyelets, such as on belts.
Related Documents for Brother PC-6500 User's Guide
All trademarks are property of their respective owners. Tightrope
Interactive