䔀䴀䈀刀伀䤀䐀䔀刀䤀一䜀; 匀椀洀瀀氀攀 攀洀戀爀漀椀搀攀爀椀渀最; 䔀洀戀爀漀椀搀攀爀椀渀最 洀甀氀琀椀ⴀ挀漀氀漀爀 瀀愀琀琀攀爀渀猀- Page 96

Simple embroidering

1. After threading the bobbin thread, the upper

thread and the needle, pass the thread down
through the hole in embroidery foot Q, and
then pull about 2" (5 cm) of the upper thread
out toward the rear of the machine.

2. Design the embroidery pattern.

3. Lower the presser foot and press the

start/stop button to start the machine. After
sewing 5 to 6 stitches, stop the machine and
trim off any excess thread at the beginning of
the embroidery.

4. Press the start/stop button again to continue

embroidering. The machine stops
embroidering when it has completed all of the
stitching with the thread color that is installed.

Note
The sewing speed is automatically controlled by
the machine according to the pattern selected.

EMBROIDERING

(1)

(2)

(3)

Embroidering multi-color patterns

When the selected pattern can be embroidered using different colors of thread, the pattern appears on the
screen separated into each color. The order of embroidering is shown from left to right.

Example: To embroider the floral pattern

of the letter “B”

1. Thread the first color. (Refer to the procedure

explained above.)
When the start/stop button is pressed, the first
part of the pattern (1) is sewn, and then the
machine automatically sews the
reinforcement stitches and stops.

Note
–

Be sure to raise the presser foot before
changing the thread.

–

When embroidering for this color is finished,
the parts of the pattern automatically move
one position to the left.

(4)

93

CONTENTS

SETTING UP

SEWING

UTILITY

STITCHES

MY CUSTOM

STITCH

TM

(CREATE

YOUR

OWN

STITCH

DESIGNS)

EMBROIDERING

MAINTENANCE

ERROR

MESSAGES

SEWING CHART

PATTERNS

(PROGRAMMED

IN MACHINE)