䤀渀猀攀爀琀椀渀最 琀栀攀 昀愀戀爀椀挀 椀渀 琀栀攀 攀洀戀爀漀椀搀攀爀礀 昀爀愀洀攀; Depending on the size of the pattern and the position of the pattern to be embroidered, it may; not be possible to use the medium and small frames. When using these frames, be sure to- Page 93

Brother PC-6500 User's Guide

2014 Dodge Charger SRT Owner Manual

Table of Contents

匀䔀吀吀䤀一䜀 唀倀
匀䔀圀䤀一䜀
唀吀䤀䰀䤀吀夀 匀吀䤀吀䌀䠀䔀匀
䴀夀 䌀唀匀吀伀䴀 匀吀䤀吀䌀䠀吀䴀 ⠀䌀刀䔀䄀吀䔀 夀伀唀刀 伀圀一 匀吀䤀吀䌀䠀 䐀䔀匀䤀䜀一匀⤀
䔀䴀䈀刀伀䤀䐀䔀刀䤀一䜀 
background image

90

CONTENTS

SETTING UP

SEWING

UTILITY

STITCHES

MY CUSTOM

STITCH

TM

(CREATE

YOUR

OWN

STITCH

DESIGNS)

EMBROIDERING

MAINTENANCE

ERROR

MESSAGES

SEWING CHART

PATTERNS

(PROGRAMMED

IN MACHINE)

2

3

4

1

1

2. Loosen the screw on the outer frame and separate the inner

and outer frames. Place the fabric on top of the outer frame
with the right side of the fabric facing up, and then place the
inner frame inside the outer frame to clamp the fabric.

1

Inner frame

2

Outer frame

3

Screw

4

Loosen

5

Right side of fabric

Note
Be sure to align the arrow marks on the two frames (

on the

inner frame with 

on the outer frame).

1

2

5. Place the inner frame on top of the fabric, place the

embroidery sheet inside the inner frame, and then align the
center of the lines on the sheet with the mark on the fabric.

1

Inner frame

2

Line

Note
For best results, lay the outer frame on a flat surface and lay the
fabric on top of it before aligning the center of the embroidery
sheet with the mark on the fabric.

3. Tighten the screw just enough to secure the fabric, and then

gently remove the fabric from the frame without loosening
the screw.

1

Tighten

Note
This stretches the fabric to help reduce pattern distortions while
embroidering.

4. Remove the inner frame.

Embroidery frames are available in four sizes: extra-large, large, medium, and small.

Embroidery area of extra-large frame: 11-53/64" (30 cm) (H) 

×

5-3/64" (13 cm) (W)

Embroidery area of large frame: 7" (18 cm) (H) 

×

5-3/64” (13 cm) (W)

Embroidery area of medium frame: 4" (10 cm) (H) 

×

4" (10 cm) (W)

Embroidery area of small frame: 25/324" (2 cm) (H) 

×

2-23/64" (6 cm) (W) (for embroidering initials)

CAUTION

Depending on the size of the pattern and the position of the pattern to be embroidered, it may
not be possible to use the medium and small frames. When using these frames, be sure to
check the pattern layout on the screen (refer to page 98) before starting to embroider. If the
wrong frame is used by mistake, the presser foot may hit the frame, possibly causing injuries.

Do not use any embroidery frames other than those shown here, otherwise injuries could occur.

1. Use a chalk pen to mark the center of the embroidering

position on the fabric.

Inserting the fabric in the embroidery frame

Detailed Information for Brother PC-6500 User's Guide

Lists of information found in Brother PC-6500 User's Guide - Page 93

  • 2. Loosen the screw on the outer frame and separate the inner and outer frames.
  • 5. Place the inner frame on top of the fabric, place the embroidery sheet inside the inner frame, and then align the center of the lines on the sheet with the mark on the fabric.
  • 3. Tighten the screw just enough to secure the fabric, and then gently remove the fabric from the frame without loosening the screw.
  • 4. Remove the inner frame.
  • 1. Use a chalk pen to mark the center of the embroidering position on the fabric.

Related Documents for Brother PC-6500 User's Guide