唀吀䤀䰀䤀吀夀 匀吀䤀吀䌀䠀䔀匀; 䈀䄀匀䤀䌀 匀吀䤀吀䌀䠀䤀一䜀; 刀攀椀渀昀漀爀挀攀搀 猀琀椀琀挀栀椀渀最 漀昀 猀琀爀攀琀挀栀 昀愀戀爀椀挀- Page 46

43

CONTENTS

SETTING UP

SEWING

UTILITY

STITCHES

MY CUSTOM

STITCH

TM

(CREATE

YOUR

OWN

STITCH

DESIGNS)

EMBROIDERING

MAINTENANCE

ERROR

MESSAGES

SEWING CHART

PATTERNS

(PROGRAMMED

IN MACHINE)

BASIC STITCHING

1

Straight (Left) [straight stitch (left needle position)]: for
normal sewing

2

Straight (Mid) [straight stitch (center needle position)]: for
normal sewing

3

Triple stretch stitch: for reinforced stitching

4

Stretch stitch: for sewing stretch fabric

5

1. Baste or pin together the fabric pieces before sewing, attach

presser foot J, and lower the presser foot lever.

2. Press the reverse/reinforcement stitch button to sew

reverse/reinforcement stitches, and then press the start/stop
button to continue sewing.

1

Reverse stitches at beginning

Note
–

Be sure to place the edge of the fabric at least 3 to 4 stitch
lengths behind the presser foot so that the reverse/
reinforcement stitches can be sewn.

–

If automatic reverse/reinforcement stitching is turned on
before you start sewing, pressing just the start/stop button
automatically sews reverse/reinforcement stitches before
sewing.

5

3. Slow down the sewing speed near the end of the stitching,

and then press the reverse/reinforcement stitch button to
sew reverse/reinforcement stitches and stop the machine.

4. Press the thread cutter button to cut the threads.

Note
If automatic thread cutting and automatic reverse/reinforcement
stitching are turned on before you start sewing, pressing the
reverse/reinforcement stitch button at the end of the stitching
automatically sews reverse/reinforcement stitches, trims the
threads and stops the machine.

UTILITY STITCHES

CHAPTER 3

J

1

2

3

4

6

1

5

Baste the fabric beforehand and sew along the basting using a

stretch stitch (

or 

).

1

Basting

Note
Do not pull the fabric while sewing.

Reinforced stitching of stretch fabric