䘀䰀䄀吀ⴀ䘀䔀䰀䰀 匀䔀䄀䴀 匀䔀圀䤀一䜀; Straight (Mid) ; FLAT-FELL SEAM SEWING- Page 53
Brother PC-6500 User's Guide
Table of Contents
50
FLAT-FELL SEAM SEWING
J
1. Attach presser foot J, sew the seam, and then cut off half of
the seam allowance from the one that will lie flat.
1
About 15/32" (1.2 cm)
2
Wrong side of fabric
Note
If automatic thread cutting and automatic reverse/reinforcement
stitching are turned on before you start sewing, pressing just the
start/stop button automatically sews reverse stitches before
sewing. In addition, pressing the reverse/reinforcement stitch
button at the end of the stitching automatically sews reverse
stitches, trims the threads and stops the machine.
2. Spread out the fabric along the seamline.
1
Seamline
2
Wrong side of fabric
3. Iron both seam allowances toward the more narrow (cut)
one.
1
Wrong side of fabric
4. Fold the longer seam allowance around the more narrow
one, and sew the edge of the fold so that the seam appears
as shown.
1
Wrong side of fabric
2
Right side of fabric
Sew flat-fell seams to reinforce seams and for neatly finishing edges.
1
Straight (Mid) [straight stitch (center needle position)]
1
Detailed Information for Brother PC-6500 User's Guide
Lists of information found in Brother PC-6500 User's Guide - Page 53
- 1. Attach presser foot J, sew the seam, and then cut off half of the seam allowance from the one that will lie flat.
- 1.2 cm) 2 Wrong side of fabric Note If automatic thread cutting and automatic reverse/reinforcement stitching are turned on before you start sewing, pressing just the start/stop button automatically sews reverse stitches before sewing.
- 2. Spread out the fabric along the seamline.
- 3. Iron both seam allowances toward the more narrow (cut) one.
- 4. Fold the longer seam allowance around the more narrow one, and sew the edge of the fold so that the seam appears as shown.
Related Documents for Brother PC-6500 User's Guide
All trademarks are property of their respective owners. Tightrope
Interactive