一䔀䔀䐀䰀䔀; 䌀栀攀挀欀椀渀最 琀栀攀 渀攀攀搀氀攀; 䌀栀愀渀最椀渀最 琀栀攀 渀攀攀搀氀攀- Page 23

20

CONTENTS

SETTING UP

SEWING

UTILITY

STITCHES

MY CUSTOM

STITCH

TM

(CREATE

YOUR

OWN

STITCH

DESIGNS)

EMBROIDERING

MAINTENANCE

ERROR

MESSAGES

SEWING CHART

PATTERNS

(PROGRAMMED

IN MACHINE)

NEEDLE

Changing the needle

6

A 75/11 needle is installed in the machine when you purchase it.

1. Press the needle position button to raise the needle.

2. Turn off the sewing machine and lower the presser foot

lever.

3. Loosen the needle clamp screw with a screwdriver.

4. Pull out the needle.

CAUTION
Do not apply a strong force when
loosening or tightening the
needle clamp screw, otherwise
certain parts of the machine may
be damaged.

5. With the flat side of the needle facing toward the back, insert

the needle as far up as possible so that it touches the
needle stopper. Fasten the screw securely with a
screwdriver.

1

Needle stopper

6. Turn the sewing machine on.

Checking the needle

1

Place the flat side of the needle on a flat surface and check that
the needle is not bent up, down, or to either side. If the needle
is bent, it should be thrown away to prevent damage to your
project or to the machine.

1

Flat surface (needle plate, glass, ruler, etc.)

6

1