一攀攀搀氀攀 琀栀爀攀愀搀攀爀; Thread (cotton)- Page 29

Brother PC-6500 User's Guide

2014 Dodge Charger SRT Owner Manual

Table of Contents

匀䔀吀吀䤀一䜀 唀倀
匀䔀圀䤀一䜀
唀吀䤀䰀䤀吀夀 匀吀䤀吀䌀䠀䔀匀
䴀夀 䌀唀匀吀伀䴀 匀吀䤀吀䌀䠀吀䴀 ⠀䌀刀䔀䄀吀䔀 夀伀唀刀 伀圀一 匀吀䤀吀䌀䠀 䐀䔀匀䤀䜀一匀⤀
䔀䴀䈀刀伀䤀䐀䔀刀䤀一䜀 
background image

Needle

Thread (cotton)

65/9

#30, 50, 60

75/11

#30

90/14

#30

100/16

#20

26

CONTENTS

SETTING UP

SEWING

UTILITY

STITCHES

MY CUSTOM

STITCH

TM

(CREATE

YOUR

OWN

STITCH

DESIGNS)

EMBROIDERING

MAINTENANCE

ERROR

MESSAGES

SEWING CHART

PATTERNS

(PROGRAMMED

IN MACHINE)

Needle threader

5

5. Pull the thread through the eye of the needle out towards

the rear of the machine.

6. Pass the thread underneath the presser foot, and then pull

about 2" (5.0 cm) of the upper thread out toward the rear of
the machine.

Note
You can begin sewing without pulling up the bobbin thread.

Note

The needle threader cannot be used with the needle and
thread combinations shown at the left.

The needle threader can be used with transparent nylon
thread and any size needle between 90/14 and 100/16.

4. While gently holding the thread, raise the needle threader

lever.

5

1

2

3

5

1

2

2

1. Use your left index finger to lower the needle threader lever

while gently pulling the thread to the left so that it catches on
the large hook.

1

Needle threader lever

2

Large hook

2. Lower the needle threader lever to its lowest position and

check that the thread is held by the large hook and that the
small hook has passed through the eye of the needle.

1

Small hook

3. Pull the thread through the guides on each side of the

needle so that the thread catches on the hook that passes
through the eye of the needle.

2

Guides

Detailed Information for Brother PC-6500 User's Guide

Lists of information found in Brother PC-6500 User's Guide - Page 29

  • 5. Pull the thread through the eye of the needle out towards the rear of the machine.
  • 6. Pass the thread underneath the presser foot, and then pull about 2" (5.
  • 16. 4.
  • 1. Use your left index finger to lower the needle threader lever while gently pulling the thread to the left so that it catches on the large hook.
  • 2. Lower the needle threader lever to its lowest position and check that the thread is held by the large hook and that the small hook has passed through the eye of the needle.
  • 3. Pull the thread through the guides on each side of the needle so that the thread catches on the hook that passes through the eye of the needle.

Related Documents for Brother PC-6500 User's Guide