䐀䄀刀一䤀一䜀- Page 65

62

CONTENTS

SETTING UP

SEWING

UTILITY

STITCHES

MY CUSTOM

STITCH

TM

(CREATE

YOUR

OWN

STITCH

DESIGNS)

EMBROIDERING

MAINTENANCE

ERROR

MESSAGES

SEWING CHART

PATTERNS

(PROGRAMMED

IN MACHINE)

1

2

3

1. Attach buttonhole foot A and set the scale to the desired

length of the darning.

1

Scale

2

13/64" (0.5 cm)

3

Length of darning

Note
The maximum length of the darning is 1-3/16” (3.0 cm).

5

3

2. Check that the needle drops at the desired position and

lower the presser foot lever, making sure that the upper
thread passes underneath the buttonhole foot.

3. Slide the outside frame of the buttonhole foot

backward as far as possible as shown in the
illustration at the left, making sure that there is
no gap behind the part of the foot marked “A”.

Note
If the buttonhole foot is not slid back as far as possible, the
darning will not be sewn with the correct size.

5

3

5

3

2

1

5. Gently hold the end of the upper thread, and then press the

start/stop button to start the machine. Once sewing is
completed, the machine automatically sews reinforcement
stitches, and then stops.

Note
If automatic thread cutting is turned on before you start sewing,
both threads are automatically cut after the reinforcement
stitches are sewn.

4. Lower the buttonhole lever so that it is positioned behind the

metal bracket on the buttonhole foot.

1

Buttonhole lever

2

Metal bracket on the buttonhole foot

A

DARNING

Darning

1

for medium weight fabric

2

for thick fabric

A

1

2