伀嘀䔀刀䌀䄀匀吀䤀一䜀; 匀攀眀椀渀最 眀椀琀栀 Ⰰ 漀爀; After the stitch width is adjusted, turn the balance wheel- Page 56

53

CONTENTS

SETTING UP

SEWING

UTILITY

STITCHES

MY CUSTOM

STITCH

TM

(CREATE

YOUR

OWN

STITCH

DESIGNS)

EMBROIDERING

MAINTENANCE

ERROR

MESSAGES

SEWING CHART

PATTERNS

(PROGRAMMED

IN MACHINE)

OVERCASTING

Overcasting

1

for sewing thin and medium weight fabrics

2

for sewing thick fabrics

3

for sewing thick and medium weight stretch
fabrics

4

for sewing mediumweight stretch fabrics

5

for sewing stretch fabrics

6

for sewing stretch fabrics

J

1

2

3

4

5

6

6

1

5

Attach presser foot G, lower the presser foot lever, and then
sew the overcasting with the fabric edge against the guide of
presser foot G.

1

Guide

Note
If automatic thread cutting and automatic reverse/reinforcement
stitching are turned on before you start sewing, pressing just the
start/stop button automatically sews reinforcement stitches
before sewing. In addition, pressing the reverse/reinforcement
stitch button at the end of the stitching automatically sews
reinforcement stitches, trims the threads and stops the
machine.

CAUTION
After the stitch width is adjusted, turn the balance wheel
toward you by hand and check that the needle does not
touch the presser foot. If the needle hits the presser foot
and breaks, injuries may occur.

Sewing with

, 

or 

Attach presser foot J, and check that the needle drops slightly
off the edge of the fabric before sewing.

Note
If automatic thread cutting and automatic reverse/reinforcement
stitching are turned on before you start sewing, pressing just the
start/stop button automatically sews reinforcement stitches
before sewing. In addition, pressing the reverse/reinforcement
stitch button at the end of the stitching automatically sews
reinforcement stitches, trims the threads and stops the
machine.

Sewing with 

, 

or 

G

G

G

J

Utility stitches that display 

can be sewn using the side cutter. For details on installing and using the

side cutter, refer to page 16.