Do not insert the card in any direction; other than that described above, and do; not force it into the slot, otherwise the- Page 106

4. Press .

5. The pattern selection screen for the inserted

memory card is displayed. [The illustration at
the left shows the Transportation card No.2
(part code SA299, X58321-001) (optional).]

Note

If the screen shown at the left is not displayed,

press the EMBROIDERY key before pressing

.

6. Select the desired pattern in the same way as

you select a one-point pattern. (Refer to page
101 for more details.)

3. Set the main power switch to “I” to turn on the

sewing machine.

CAUTION
–

Do not insert the card in any direction
other than that described above, and do
not force it into the slot, otherwise the
card or the machine may be damaged.

–

When the card is inserted, it should appear
as shown in the illustration at the left.
Trying to push the card in any further will
damage the connector.

–

Always turn off the main power switch
before inserting or removing the
embroidery card (memory card).

–

Always keep the memory card in its case
when it is not being used.

103

CONTENTS

SETTING UP

SEWING

UTILITY

STITCHES

MY CUSTOM

STITCH

TM

(CREATE

YOUR

OWN

STITCH

DESIGNS)

EMBROIDERING

MAINTENANCE

ERROR

MESSAGES

SEWING CHART

PATTERNS

(PROGRAMMED

IN MACHINE)