Example: To embroider connecting patterns- Page 119

116

CONTENTS

SETTING UP

SEWING

UTILITY

STITCHES

MY CUSTOM

STITCH

TM

(CREATE

YOUR

OWN

STITCH

DESIGNS)

EMBROIDERING

MAINTENANCE

ERROR

MESSAGES

SEWING CHART

PATTERNS

(PROGRAMMED

IN MACHINE)

Connecting patterns

Example: To embroider connecting patterns

1. Mark the location on the fabric where you

wish to embroider the design.

2. Position the embroidery sheet over the entire

design drawn on the fabric so that the
reference lines of the embroidery sheet align
with the center of the design, and then draw
reference lines for the entire design.

3. Stretch the fabric between the inner and

outer embroidery frames while making sure
that the reference lines on the embroidery
sheet remain aligned with reference lines for
the design drawn on the fabric. Then, attach
the embroidery frame to the embroidery arm
at the top installation position. (Refer to
pages 90 - 92 for more details on attaching
the embroidery frame.)

1

Top installation position

4. Choose a pattern.

5. Before embroidering each of the two patterns

shown in the illustration, press the LAYOUT

key, and position the pattern correctly. To

rotate the pattern, press 

(refer to

page 106). To position the frame so that the

pattern will be embroidered correctly, press

so that it appears as 

(refer to

page 107), and then use the arrow keys to

align the needle with the center of each

pattern's reference lines (refer to page 105).

6. Remove the embroidery frame, and then re-

attach it to the embroidery arm at the bottom
installation position.