䈀伀䈀䈀䤀一 圀䤀一䐀䤀一䜀 ⼀ 䰀伀圀䔀刀 吀䠀刀䔀䄀䐀䤀一䜀- Page 25

22

CONTENTS

SETTING UP

SEWING

UTILITY

STITCHES

MY CUSTOM

STITCH

TM

(CREATE

YOUR

OWN

STITCH

DESIGNS)

EMBROIDERING

MAINTENANCE

ERROR

MESSAGES

SEWING CHART

PATTERNS

(PROGRAMMED

IN MACHINE)

(b)

(a)

2

1

(a)

1

(b)

4. Place the bobbin on the bobbin winder shaft so that the

spring on the shaft fits into the groove in the top of the
bobbin (a). Then, slide the bobbin winder shaft to the right
(b).

1

Spring on the shaft

2

Groove in the bobbin

5. Wind the thread clockwise around the bobbin four or five

times (a), pass the thread through the slit in the bobbin
winder seat, and then pull it as shown to cut it (b).

1

Bobbin winder seat

6. Slide the sewing speed controller to its maximum (as far as

possible to the right).

7. Press the start/stop button. The bobbin stops spinning

automatically when it is full.

8. After the bobbin has stopped spinning, press the start/stop

button to stop the machine.

9. Cut the thread, slide the bobbin winder shaft to the left and

then remove the bobbin.