Activating Adaptive Cruise Control (ACC); To Activate/Deactivate; To Set A Desired Speed- Page 150

2021 Chrysler Pacifica Owner's Manual

Table of Contents

GETTING TO KNOW YOUR VEHICLE
CLIMATE CONTROLS
GETTING TO KNOW YOUR INSTRUMENT PANEL
WARNING LIGHTS AND MESSAGES
STARTING AND OPERATING
MULTIMEDIA
SAFETY
OCCUPANT RESTRAINT SYSTEMS
SERVICING AND MAINTENANCE
background image

148

STARTING AND OPERATING

 

Activating Adaptive Cruise Control (ACC)

The minimum set speed for the ACC system is 

20 mph (32 km/h).
When the system is turned on and in the READY 

state, the instrument cluster displays “ACC Ready.”
When the system is off, the instrument cluster 

display “Adaptive Cruise Control (ACC) Off.”

NOTE:

You cannot engage ACC under the following condi

-

tions: 

When the brakes are applied

When the parking brake is applied

When the automatic transmission is in PARK, 

REVERSE or NEUTRAL

When the vehicle speed is below the minimum 

speed range

When the brakes are overheated

When the driver’s door is open at low speeds

When the driver’s seat belt is unbuckled at low 

speeds

To Activate/Deactivate

Push and release the Adaptive Cruise Control 

(ACC) on/off button. The ACC menu in the 

instrument cluster will read “ACC Ready.”

To turn the system off, push and release the 

Adaptive Cruise Control (ACC) on/off button again. 

At this time, the system will turn off and the 

instrument cluster display will show “Adaptive 

Cruise Control (ACC) Off.”

To Set A Desired Speed

When the vehicle reaches the speed desired, push 

the SET (+) button or the SET (-) button and 

release. The instrument cluster display will show 

the set speed.

NOTE:

Fixed Speed Cruise Control can be used ACC 

enabled. To change between the different modes, 

push the ACC on/off button which turns the ACC 

and the Fixed Speed Cruise Control off. Pushing 

the Fixed Speed Cruise Control on/off button will 

result in turning on (changing to) Fixed Speed 

Cruise Control mode.

If ACC is set when the vehicle speed is below 

20 mph (32 km/h), the set speed will default to 

20 mph (32 km/h).

NOTE:

Fixed Speed Cruise Control cannot be set below 

20 mph (32 km/h).
If either system is set when the vehicle speed is 

above 20 mph (32 km/h), the set speed shall be 

the current speed of the vehicle.

NOTE:

Keeping your foot on the accelerator pedal can 

cause the vehicle to continue to accelerate 

beyond the set speed. If this occurs, the 

message “DRIVER OVERRIDE” will display in the 

instrument cluster display.

WARNING!

Leaving the Adaptive Cruise Control (ACC) 

system on when not in use is dangerous. You 

could accidentally set the system or cause it to 

go faster than you want. You could lose control 

and have a collision. Always leave the system off 

when you are not using it.

WARNING!

In the Fixed Speed Cruise Control mode, the 

system will not react to vehicles ahead. In 

addition, the proximity warning does not activate 

and no alarm will sound even if you are too close 

to the vehicle ahead since neither the presence 

of the vehicle ahead nor the vehicle-to-vehicle 

distance is detected. Be sure to maintain a safe 

distance between your vehicle and the vehicle 

ahead. Always be aware which mode is selected.

21_RUP_OM_EN_USC_t.book  Page 148  

Detailed Information for 2021 Chrysler Pacifica Owner's Manual

Related Documents for 2021 Chrysler Pacifica Owner's Manual