Center Seat LATCH; To Install A LATCH-Compatible Child Restraint- Page 277

2021 Chrysler Pacifica Owner's Manual

Table of Contents

GETTING TO KNOW YOUR VEHICLE
CLIMATE CONTROLS
GETTING TO KNOW YOUR INSTRUMENT PANEL
WARNING LIGHTS AND MESSAGES
STARTING AND OPERATING
MULTIMEDIA
SAFETY
OCCUPANT RESTRAINT SYSTEMS
SERVICING AND MAINTENANCE
background image

SAFETY

275

Center Seat LATCH

This vehicle has 4 lower LATCH anchorages in the 

third row, rear seat. Anchorages A and B are used 

for the right outboard position behind the front 

passenger (1). Anchorages C and D are used for 

the center seating position (2). The left outboard 

position (3) does not have lower anchorages. Do 

not install a child restraint using anchorages B and 

C. This is not a LATCH position in your vehicle.

Center Seat LATCH Positions

If a child restraint installed in the center position 

blocks the seat belt webbing or buckle for the 

outboard position, do not use that outboard 

position. If a child seat in the center position blocks 

the outboard LATCH anchors or seat belt, do not 

install a child seat in that outboard position.

Always follow the directions of the child restraint 

manufacturer when installing your child restraint. 

Not all child restraint systems will be installed as 

described here.

To Install A LATCH-Compatible Child 

Restraint

If the selected seating position has a Switchable 

Automatic Locking Retractor (ALR) seat belt, stow 

the seat belt, following the instructions below. See  

Ú

page 276 to check what type of seat belt each 

seating position has.

1. Loosen the adjusters on the lower straps and 

on the tether strap of the child seat so that 

you can more easily attach the hooks or 

connectors to the vehicle anchorages.

2. Place the child seat between the lower 

anchorages for that seating position. If the 

second row seat can be reclined, you may 

recline the seat and/or raise the head restraint 

(if adjustable) to get a better fit. If the rear seat 

can be moved forward and rearward in the 

vehicle, you may wish to move it to its 

rear-most position to make room for the child 

seat. You may also move the front seat forward 

to allow more room for the child seat.

3. Attach the lower hooks or connectors of the 

child restraint to the lower anchorages in the 

selected seating position.

4. If the child restraint has a tether strap, connect 

it to the top tether anchorage. See  

Ú

page 280 for directions to attach a tether 

anchor.

5. Tighten all of the straps as you push the child 

restraint rearward and downward into the 

seat. Remove slack in the straps according to 

the child restraint manufacturer’s instructions.

6. Test that the child restraint is installed tightly 

by pulling back and forth on the child seat at 

the belt path. It should not move more than 

1 inch (25.4 mm) in any direction.

WARNING!

Use anchorages C and D to install a 

LATCH-compatible child restraint in the center 

seating position (2). Do not install a 

LATCH-compatible child restraint using 

anchorages B and C. This is not a 

LATCH-compatible position in your vehicle.

Never use the same lower anchorage to 

attach more than one child restraint. Please 

see  

Ú

page 275 for typical installation 

instructions.

6

21_RUP_OM_EN_USC_t.book  Page 275  

Detailed Information for 2021 Chrysler Pacifica Owner's Manual

Lists of information found in 2021 Chrysler Pacifica Owner's Manual - Page 277

  • 1. Loosen the adjusters on the lower straps and on the tether strap of the child seat so that you can more easily attach the hooks or connectors to the vehicle anchorages.
  • 2. Place the child seat between the lower anchorages for that seating position.
  • 3. Attach the lower hooks or connectors of the child restraint to the lower anchorages in the selected seating position.
  • 4. If the child restraint has a tether strap, connect it to the top tether anchorage.
  • 5. Tighten all of the straps as you push the child restraint rearward and downward into the seat.
  • 6. Test that the child restraint is installed tightly by pulling back and forth on the child seat at the belt path.
  • 25.4 mm) in any direction.

Related Documents for 2021 Chrysler Pacifica Owner's Manual