Seat Belt Park Stitch — If Equipped; Installing Child Restraints Using the Top Tether Anchorage- Page 282

2021 Chrysler Pacifica Owner's Manual

Table of Contents

GETTING TO KNOW YOUR VEHICLE
CLIMATE CONTROLS
GETTING TO KNOW YOUR INSTRUMENT PANEL
WARNING LIGHTS AND MESSAGES
STARTING AND OPERATING
MULTIMEDIA
SAFETY
OCCUPANT RESTRAINT SYSTEMS
SERVICING AND MAINTENANCE
background image

280

SAFETY

 

8. If the child restraint has a top tether strap and 

the seating position has a top tether 

anchorage, connect the tether strap to the 

anchorage and tighten the tether strap. See  

Ú

page 280 for directions to attach a tether 

anchor.

9. Test that the child restraint is installed tightly 

by pulling back and forth on the child seat at 

the belt path. It should not move more than 

1 inch (25.4 mm) in any direction.

Any seat belt system will loosen with time, so check 

the belt occasionally, and pull it tight if necessary.

Seat Belt Park Stitch — If Equipped

The rear outboard seat belts may be equipped with 

a park stitch to raise the latch plate for easier 

access to occupants. If the park stitch interferes 

with the tight installation of a child restraint, slide 

the latch plate over the stitching to shorten the lap 

portion of the belt and install the car seat following 

the steps above. When the car seat is removed 

from the vehicle, slide the latch plate above the 

park stitch to enable occupants to latch the 

seatbelt securely.

Seat Belt Park Stitch Location

If the park stitch interferes with the lock-off 

features of the child restraint, do not use the 

lock-off feature. Instead, switch the seat belt to the 

locking mode, as described in the steps above or 

move the car seat to a different seating position.

Seat Belt Park Stitch

Installing Child Restraints Using the Top 

Tether Anchorage

If applicable, refer to the “Hybrid Supplement” for 

additional information.

WARNING!

Do not attach a tether strap for a rear-facing car 

seat to any location in front of the car seat, 

including the seat frame or a tether anchorage. 

Only attach the tether strap of a rear-facing car 

seat to the tether anchorage that is approved for 

that seating position, located behind the top of 

the vehicle seat. See  

Ú

page 270 for the 

location of approved tether anchorages in your 

vehicle.

21_RUP_OM_EN_USC_t.book  Page 280  

Detailed Information for 2021 Chrysler Pacifica Owner's Manual

Lists of information found in 2021 Chrysler Pacifica Owner's Manual - Page 282

  • 8. If the child restraint has a top tether strap and the seating position has a top tether anchorage, connect the tether strap to the anchorage and tighten the tether strap.
  • 9. Test that the child restraint is installed tightly by pulling back and forth on the child seat at the belt path.
  • 25.4 mm) in any direction.

Related Documents for 2021 Chrysler Pacifica Owner's Manual