Adding Coolant; Cooling System Pressure Cap- Page 330

2021 Chrysler Pacifica Owner's Manual

Table of Contents

GETTING TO KNOW YOUR VEHICLE
CLIMATE CONTROLS
GETTING TO KNOW YOUR INSTRUMENT PANEL
WARNING LIGHTS AND MESSAGES
STARTING AND OPERATING
MULTIMEDIA
SAFETY
OCCUPANT RESTRAINT SYSTEMS
SERVICING AND MAINTENANCE
background image

328

SERVICING AND MAINTENANCE

 

Do not use water alone or alcohol-based engine 

coolant products. Do not use additional rust 

inhibitors or anti-rust products, as they may not 

be compatible with the radiator engine coolant 

and may plug the radiator.

This vehicle has not been designed for use with 

propylene glycol-based engine coolant. Use of 

propylene glycol-based engine coolant is not 

recommended.

Some vehicles require special tools to add 

coolant properly. Failure to fill these systems 

properly could lead to severe internal engine 

damage. If any coolant is needed to be added to 

the system please contact an authorized dealer.

Adding Coolant 

Your vehicle has been built with an improved 

engine coolant (OAT coolant conforming to 

MS.90032) that allows extended maintenance 

intervals. This engine coolant (antifreeze) can

be used up to ten years or 150,000 miles 

(240,000 km) before replacement. To prevent 

reducing this extended maintenance period, it is 

important that you use the same engine coolant 

(OAT coolant conforming to MS.90032) throughout 

the life of your vehicle.
Please review these recommendations for using 

OAT engine coolant that meets the requirements of 

the manufacturer Material Standard MS.90032. 

When adding engine coolant:

We recommend using Mopar® Antifreeze/

Coolant 10 Year/150,000 Mile (240,000 km) 

Formula OAT that meets the requirements of the 

manufacturer Material Standard MS.90032.

Mix a minimum solution of 50% OAT engine 

coolant that meets the requirements of the 

manufacturer Material Standard MS.90032 

and distilled water. Use higher concentrations 

(not to exceed 70%) if temperatures below 

−34°F (−37°C) are anticipated. Please contact 

an authorized dealer for assistance.

Use only high purity water such as distilled or 

deionized water when mixing the water/engine 

coolant solution. The use of lower quality water 

will reduce the amount of corrosion protection 

in the engine cooling system.

NOTE:

It is the owner's responsibility to maintain the 

proper level of protection against freezing 

according to the temperatures occurring in the 

area where the vehicle is operated.

Some vehicles require special tools to add 

coolant properly. Failure to fill these systems 

properly could lead to severe internal engine 

damage. If any coolant is needed to be added to 

the system, please contact an authorized 

dealer.

Mixing engine coolant types is not recom

-

mended and can result in cooling system 

damage. If HOAT and OAT coolant are mixed in 

an emergency, have an authorized dealer drain, 

flush, and refill with OAT coolant (conforming to 

MS.90032) as soon as possible.

Cooling System Pressure Cap   

The cap must be fully tightened to prevent loss of 

engine coolant (antifreeze), and to ensure that 

engine coolant will return to the radiator from the 

coolant expansion bottle/recovery tank (if 

equipped).
The cap should be inspected and cleaned if there 

is any accumulation of foreign material on the 

sealing surfaces.

WARNING!

Do not open hot engine cooling system. Never 

add engine coolant (antifreeze) when the 

engine is overheated. Do not loosen or 

remove the cap to cool an overheated engine. 

Heat causes pressure to build-up in the 

cooling system. To prevent scalding or injury, 

do not remove the pressure cap while the 

system is hot or under pressure.

Do not use a pressure cap other than the one 

specified for your vehicle. Personal injury or 

engine damage may result.

21_RUP_OM_EN_USC_t.book  Page 328  

Detailed Information for 2021 Chrysler Pacifica Owner's Manual

Lists of information found in 2021 Chrysler Pacifica Owner's Manual - Page 330

  • 32. When adding engine coolant:  We recommend using Mopar® Antifreeze/ Coolant 10 Year/150,000 Mile (240,000 km) Formula OAT that meets the requirements of the manufacturer Material Standard MS.
  • 32.  Mix a minimum solution of 50% OAT engine coolant that meets the requirements of the manufacturer Material Standard MS.

Related Documents for 2021 Chrysler Pacifica Owner's Manual