SERVICING AND MAINTENANCE- Page 324

2021 Chrysler Pacifica Owner's Manual

Table of Contents

GETTING TO KNOW YOUR VEHICLE
CLIMATE CONTROLS
GETTING TO KNOW YOUR INSTRUMENT PANEL
WARNING LIGHTS AND MESSAGES
STARTING AND OPERATING
MULTIMEDIA
SAFETY
OCCUPANT RESTRAINT SYSTEMS
SERVICING AND MAINTENANCE
background image

322

SERVICING AND MAINTENANCE

 

3. There are glove compartment travel stops on 

either side of the glove compartment door. To 

release them, push inward on each travel stop, 

and pull the glove compartment door down 

until the travel stops pass clear of their 

hooking points.

4. Open the glove compartment door as far as 

possible to gain access to the cabin air filter 

compartment cover.

Cabin Air Filter Compartment Cover

5. Pry up the lid of each individual compartment 

snap, and detach it from the rest of the snap. 

There is a small space on the side of each 

snap to use for separating the lid from the 

snap. Once detached, remove the rest of the 

snap completely from the compartment cover.

6. After removing the snaps, lift up the 

compartment cover to gain access to the fresh 

air inlet.

Fresh Air Inlet

7. Remove the filter cover by prying back each of 

the retaining tabs from their hooking points, 

and then pulling the filter cover out to expose 

the cabin air filter. Remove the air filter by 

pulling it straight out of the housing.

8. Install the new air filter with the arrow on the 

filter pointing toward the floor.

9. Once the filter is replaced, reinstall the filter 

cover, making sure the retaining tabs are fully 

secured into their housings.

10. Close the cabin air filter compartment cover, 

and reinsert the snaps into their slots. Push 

the snap lids until fully attached.

11. Push the glove compartment door to the near 

closed position to reengage the glove 

compartment travel stops. Finally, pull the 

glove compartment tension tether clip down 

and slide it back into the slot on the side of the 

glove compartment door.

1 — Compartment Cover
2 — Compartment Snap

1 — Filter Cover
2 — Retaining Tabs

  

CAUTION!

The cabin air filter is identified with an arrow to 

indicate airflow direction through the filter. 

Failure to properly install the filter will result in 

the need to replace it more often.

21_RUP_OM_EN_USC_t.book  Page 322  

Detailed Information for 2021 Chrysler Pacifica Owner's Manual

Lists of information found in 2021 Chrysler Pacifica Owner's Manual - Page 324

  • 3. There are glove compartment travel stops on either side of the glove compartment door.
  • 4. Open the glove compartment door as far as possible to gain access to the cabin air filter compartment cover.
  • 5. Pry up the lid of each individual compartment snap, and detach it from the rest of the snap.
  • 6. After removing the snaps, lift up the compartment cover to gain access to the fresh air inlet.
  • 7. Remove the filter cover by prying back each of the retaining tabs from their hooking points, and then pulling the filter cover out to expose the cabin air filter.
  • 8. Install the new air filter with the arrow on the filter pointing toward the floor.
  • 9. Once the filter is replaced, reinstall the filter cover, making sure the retaining tabs are fully secured into their housings.
  • 11. Push the glove compartment door to the near closed position to reengage the glove compartment travel stops.

Related Documents for 2021 Chrysler Pacifica Owner's Manual