Networking; Connecting the printer to a wireless network using Wi-Fi Protected Setup (WPS); Note: - Page 36

Networking

Note: 

Purchase a MarkNet(TM) N8360 wireless network adapter first before setting up the printer on a

wireless network. For information on installing the wireless network adapter, see the setup sheet that came
with the adapter.

Connecting the printer to a wireless network using Wi

‑

Fi Protected Setup

(WPS)

Before you begin, make sure that:

•

The access point (wireless router) is WPS

‑

certified or WPS

‑

compatible. For more information, see the

documentation that came with your access point.

•

A wireless network adapter is installed in your printer. For more information, see the instructions that came
with the adapter.

Using the Push Button method

1

From the control panel, navigate to:

Settings

 > 

Network/Ports

 > 

Wireless

 > 

Wi

‑

Fi Protected Setup

 > 

Start Push Button Method

2

Follow the instructions on the display.

Using the personal identification number (PIN) method

1

From the control panel, navigate to:

Settings

 > 

Network/Ports

 > 

Wireless

 > 

Wi

‑

Fi Protected Setup

 > 

Start PIN Method

2

Copy the eight

‑

digit WPS PIN.

3

Open a Web browser, and then type the IP address of your access point in the address field.

Notes:

•

View the printer IP address on the printer home screen. The IP address appears as four sets of
numbers separated by periods, such as 123.123.123.123.

•

If you are using a proxy server, then temporarily disable it to load the Web page correctly.

4

Access the WPS settings. For more information, see the documentation that came with your access
point.

5

Enter the eight

‑

digit PIN, and then save the changes.

Maintaining the printer

36