Installing an internal solutions port; Warning—Potential Damage: ; CAUTION—POTENTIAL INJURY: - Page 121

3

Unpack the memory card.

Warning—Potential Damage: 

Avoid touching the connection points along the edge of the card.

4

Insert the memory card until it 

clicks

 into place.

5

Reattach the access cover.

6

Connect the power cord to the electrical outlet, and then turn on the printer.

CAUTION—POTENTIAL INJURY: 

To avoid the risk of fire or electrical shock, connect the power cord

to an appropriately rated and properly grounded electrical outlet that is near the product and easily
accessible.

Installing an internal solutions port

CAUTION—SHOCK HAZARD: 

To avoid the risk of electrical shock, if you are accessing the controller

board or installing optional hardware or memory devices sometime after setting up the printer, then turn
the printer off, and unplug the power cord from the electrical outlet before continuing. If you have any
other devices attached to the printer, then turn them off as well, and unplug any cables going into the
printer.

1

Turn off the printer, and then unplug the power cord from the electrical outlet.

2

Using a flat

‑

head screwdriver, remove the controller board access cover.

Warning—Potential Damage: 

Controller board electronic components are easily damaged by static

electricity. Touch a metal surface on the printer before touching any controller board components or
connectors.

Upgrading and migrating

121