To Cancel- Page 190

2021 Jeep Gladiator Owner's Manual

Table of Contents

GETTING TO KNOW YOUR VEHICLE
GETTING TO KNOW YOUR INSTRUMENT PANEL
WARNING LIGHTS AND MESSAGES
STARTING AND OPERATING
MULTIMEDIA
SAFETY
OCCUPANT RESTRAINT SYSTEMS
SERVICING AND MAINTENANCE
VEHICLE MAINTENANCE
TECHNICAL SPECIFICATIONS
background image

188

STARTING AND OPERATING

 

If ACC is set when the vehicle speed is below 

20 mph (32 km/h), the set speed will default to 

20 mph (32 km/h).

NOTE:

Fixed Speed Cruise Control cannot be set below 

20 mph (32 km/h).
If either system is set when the vehicle speed is 

above 20 mph (32 km/h), the set speed shall 

be the current speed of the vehicle.

NOTE:

Keeping your foot on the accelerator pedal 

can cause the vehicle to continue to accel

-

erate beyond the set speed. If this occurs, the 

message “DRIVER OVERRIDE” will display in 

the instrument cluster display.

If you continue to accelerate beyond the set 

speed while ACC is enabled, the system will 

not be controlling the distance between your 

vehicle and the vehicle ahead. The vehicle 

speed will only be determined by the position 

of the accelerator pedal.

To Cancel

The following conditions cancel the ACC or Fixed 

Speed Cruise Control systems:

The brake pedal is applied

The CANC (cancel) button is pushed

The Anti-Lock Brake System (ABS) activates

The gear selector is removed from the DRIVE 

position

The braking temperature exceeds normal 

range (overheated)

The Electronic Stability Control/Traction 

Control System (ESC/TCS) activates

The vehicle parking brake is applied

A Trailer Sway Control (TSC) event occurs

The driver switches ESC to Full Off mode.

The vehicle speed is less than 15 mph 

(24 km/h) (manual transmission only)

The clutch is pressed for more than 10 

seconds (manual transmission only)

The vehicle is placed in NEUTRAL for more 

than 10 seconds (manual transmission only)

The driver shifts to FIRST gear (manual trans

-

mission only)

The following conditions will only cancel the ACC 

system:

Driver seat belt is unbuckled at low speeds

Driver door is opened at low speeds

WARNING!

In Fixed Speed Cruise Control mode (ACC not 

enabled), the system will not react to vehicles 

ahead. In addition, the proximity warning 

does not activate and no alarm will sound 

even if you are too close to the vehicle ahead 

since neither the presence of the vehicle 

ahead nor the vehicle-to-vehicle distance is 

detected. Be sure to maintain a safe distance 

between your vehicle and the vehicle ahead. 

Always be aware which mode is selected.

21_JT_OM_EN_USC_t.book  Page 188  

Detailed Information for 2021 Jeep Gladiator Owner's Manual

Related Documents for 2021 Jeep Gladiator Owner's Manual