AUXILIARY DRIVING SYSTEMS; Blind Spot Monitoring (BSM) — If Equipped- Page 331

2021 Jeep Gladiator Owner's Manual

Table of Contents

GETTING TO KNOW YOUR VEHICLE
GETTING TO KNOW YOUR INSTRUMENT PANEL
WARNING LIGHTS AND MESSAGES
STARTING AND OPERATING
MULTIMEDIA
SAFETY
OCCUPANT RESTRAINT SYSTEMS
SERVICING AND MAINTENANCE
VEHICLE MAINTENANCE
TECHNICAL SPECIFICATIONS
background image

SAFETY

329

When TSC is functioning, the ESC Activation/

Malfunction Indicator Light will flash, the engine 

power may be reduced, and you may feel the 

brakes being applied to individual wheels to 

attempt to stop the trailer from swaying. TSC is 

disabled when the ESC system is in the “Partial 

Off” or “Full Off” modes.

AUXILIARY DRIVING SYSTEMS

B

LIND

 S

POT

 M

ONITORING

 (BSM) — 

I

F

 E

QUIPPED

 

The BSM system uses two radar sensors, 

located inside the taillights, to detect highway 

licensable vehicles (automobiles, trucks, 

motorcycles, etc.) that enter the blind spot 

zones from the rear/front/side of the vehicle.

Rear Detection Zones

When the vehicle is started, the BSM Warning 

Light will momentarily illuminate in both outside 

rearview mirrors to let the driver know that the 

system is operational. The BSM system sensors 

operate when the vehicle is in any forward gear 

or REVERSE (R).
The BSM detection zone covers approximately 

one lane width on both sides of the vehicle 12 ft 

(3.8 m). The zone starts at the outside rearview 

mirror and extends approximately 10 ft (3 m) 

beyond the rear fascia/bumper of the vehicle. 

The BSM system monitors the detection zones 

on both sides of the vehicle when the vehicle 

speed reaches approximately 6 mph (10 km/h) 

or higher and will alert the driver of vehicles in 

these areas.

NOTE:

The BSM system DOES NOT alert the driver 

about rapidly approaching vehicles that are 

outside the detection zones.

The BSM system detection zone DOES NOT 

change if your vehicle is towing a trailer. 

Therefore, visually verify the adjacent lane is 

clear for both your vehicle and trailer before 

making a lane change. If the trailer or other 

object (i.e., bicycle, sports equipment) 

extends beyond the side of your vehicle, this 

may result in the BSM warning light 

remaining illuminated the entire time the 

vehicle is in a forward gear. See  

Ú

page 234 

for more information.

The Blind Spot Monitoring (BSM) system may 

experience dropouts (blinking on and off) of 

the side mirror Warning Indicator lamps 

when a motorcycle or any small object 

remains at the side of the vehicle for 

extended periods of time (more than a couple 

of seconds).

WARNING!

If TSC activates while driving, slow the vehicle 

down, stop at the nearest safe location, and 

adjust the trailer load to eliminate trailer 

sway.

6

21_JT_OM_EN_USC_t.book  Page 329  

Detailed Information for 2021 Jeep Gladiator Owner's Manual

Lists of information found in 2021 Jeep Gladiator Owner's Manual - Page 331

  • 3.8 m).

Related Documents for 2021 Jeep Gladiator Owner's Manual