SERVICING AND MAINTENANCE- Page 479

2021 Jeep Gladiator Owner's Manual

Table of Contents

GETTING TO KNOW YOUR VEHICLE
GETTING TO KNOW YOUR INSTRUMENT PANEL
WARNING LIGHTS AND MESSAGES
STARTING AND OPERATING
MULTIMEDIA
SAFETY
OCCUPANT RESTRAINT SYSTEMS
SERVICING AND MAINTENANCE
VEHICLE MAINTENANCE
TECHNICAL SPECIFICATIONS
background image

SERVICING AND MAINTENANCE

477

Rear Underside Of Front Seat

5. Finally open the carpet split around seat 

bracket and then remove the last two 

grommets.

6. When reinstalling carpet, perform these 

steps in reverse order, making sure that the 

carpet is tucked under the scuffs, B-pillar, 

and console, and then refasten the 

grommets.

Rear Carpet
1. Remove the grommets under the front seat 

(one left and one right).

Carpet Split

2. Then pull the carpet out, to the rear and 

open the carpet split around the front seat 

brackets.

3. Remove the rear Under Seat storage bin (if 

equipped), by removing the four bolts that 

hold it to the floor.

4. Remove the fastener bin from the rear floor, 

it is held in by clips.

5. Remove the jack and tools by turning the 

wing bolt counterclockwise, remove the 

wing bolt and then lift the assembly out 

from under the seat.

6. Lift carpet off of the rear retainers (one left 

and one right).

Rear Retainers

7. Remove carpet from the vehicle.
8. When reinstalling the carpet, perform these 

steps in reverse order making sure that the 

carpet is tucked under the scuffs, B-pillar, 

console, and then refasten the grommets.

1 — Harness
2 — Carpet Split

1 — Grommet

8

21_JT_OM_EN_USC_t.book  Page 477  

Detailed Information for 2021 Jeep Gladiator Owner's Manual

Lists of information found in 2021 Jeep Gladiator Owner's Manual - Page 479

  • 5. Finally open the carpet split around seat bracket and then remove the last two grommets.
  • 6. When reinstalling carpet, perform these steps in reverse order, making sure that the carpet is tucked under the scuffs, B-pillar, and console, and then refasten the grommets.
  • 1. Remove the grommets under the front seat (one left and one right).
  • 2. Then pull the carpet out, to the rear and open the carpet split around the front seat brackets.
  • 3. Remove the rear Under Seat storage bin (if equipped), by removing the four bolts that hold it to the floor.
  • 4. Remove the fastener bin from the rear floor, it is held in by clips.
  • 5. Remove the jack and tools by turning the wing bolt counterclockwise, remove the wing bolt and then lift the assembly out from under the seat.
  • 6. Lift carpet off of the rear retainers (one left and one right).
  • 7. Remove carpet from the vehicle.
  • 8. When reinstalling the carpet, perform these steps in reverse order making sure that the carpet is tucked under the scuffs, B-pillar, console, and then refasten the grommets.

Related Documents for 2021 Jeep Gladiator Owner's Manual